aqua solutions aqua solutions


Call for any Support


Manufacturer / Exporter and Supplier of

AQUA SOLUTIONS Are Leading Manufacturer In Water Treatment And Waste Water Treatment Industry From Last 17 Years. Aqua Solutions Provide You the latest concepts for Purified water storage & distribution system. Purified water generated from purified water generation system shall be transferred to the Purified water storage tank This Purified water is then re-circulated in a closed loop to various user points with the Following Features.

The storage tank assembly consisting of
• SS316L wetted parts, SS Cladded Jacketed,
• Spray ball located at the center nozzle (loop return) on the manhole
• Sanitary nozzles for feed, re-circulation, vent, pressure gauge, level switch, spare nozzles on the top (manhole) and outlet at the bottom.
• Surface finish of less than 0.4 Ra inside and mat finish on outside surface.
• Jacketed vent filter With Housing on the tank top

Following Features of The distribution pump
• SS316 L wetted parts.
• Mono-block / vertical multistage / centrifugal type.

Following Features Of The Distribution loop • SS316L, Seamless Pipes, Electro-polished.
• Internal surfaces finish less than 0.4 Ra.
• Outside Mat / Mirror polish
• Installed at a slope of 1:100 for complete drain ability.
• Properly supported with SS304 contact parts.
• Normal velocity of 2.8 m/s and during peak load velocity of min 1.2 m/s shall be maintained.
• All possible joints shall be orbital welded; remaining joints shall be sanitary tri-clamp type with silicon gaskets.

Following Features Of the Systems :
• The complete storage and distribution system shall have provision of hot water sanitization
• pressure gauges at pump outlet, loop return and compound pressure gauge on tank top
• Conductivity controllers in loop supply.
• Differential pressure sensors & transmitters are provided in loop system.
• Temperature sensors in tank bottom & loop return.
• Level controller on tank for pump controlling and feed control.
• Sanitary UV Unit to control microbial load.
• Flow transmitters in loop return to monitor flow rate / velocity.
• Auto Dumping valve in loop supply for high conductivity.
• Auto Back Pressure Valve in loop return to regulate pressure and flow.
• The complete system shall be controlled by PLC based control panel.